China High Strength Tapered Roller Bearings L44640/L44610 07093/07210X 3659/3620 23092/23256 JHM33449/JHM33410 17098/17244A JL44642A/JL44615(1779/1729)

Bearing type: Inner ring type / Outer diameter type Inner diameter x Outer diameter x Height (mm) 07093/07210X 23.812x50.8x15.011 07093/07204 23.812x51.994x15.012 1779/1730 23.812x53.975x19.368 1779/1729 23.812x56.896x19.368 3659/3620 23.812x61.912x28.575 23092/23256 23.812x65.088x22.225 2685/2631 23.812x66.421x23.812 JHM33449/JHM33410 24x55x25 43096/43312 24.384x79.375x25.4 07098/07196 24.981x50.005x13.495 07098/07204 24.981x51.994x15.011 07098/07205 24.981x52x15.011 17098/17244A 24.981x61.981x16.002 17098/17244 24.981x62x16.002 07097/07196 25x50.005x13.495 07097/07204 25x51.994x15.011 JL44642A/JL44615 25x52x14.224 07097/07205 25x52x15.011 247/244X 25x61.912x21.018 07100-S/07196 25.4x50.005x13.495

• 1.Structural Features: Both inner and outer rings feature tapered raceways, with truncated cone-shaped rolling elements. The inner ring, outer ring, rolling elements, and cage collectively form a complete, separable assembly.
• 2.Load-bearing capacity: Capable of simultaneously withstanding radial loads and unidirectional axial loads. Axial load capacity increases with contact angle; a larger contact angle makes it suitable for applications where axial loads constitute a higher proportion.
• 3.Applicable Conditions: Commonly used in machinery subjected to combined loads, such as automotive hubs, axles, and gearboxes, as well as machine tool spindles and mining equipment. Particularly suitable for low-to-medium speed applications involving impact or vibration.
• 4.Installation Requirements: Adjust the clearance during installation (achieved through relative axial displacement between the inner and outer rings). Excessive clearance may cause vibration and noise, while insufficient clearance may accelerate wear due to increased heat generation. A suitable locking device must be used in conjunction.
• 5.Performance Limitations: Cannot withstand bidirectional axial loads. For bidirectional load-bearing requirements, must be installed in pairs with opposing directions.